Choose a Brand

Installation Instructions for Clopay Doors

Step 1

  • Align the side of the Bottom Bumper bracket next to the lower roller bracket.
  • Align the top of the Bottom Bumper bracket to the door rib
  • Make sure the foot of the bracket goes away from you (under the door)

Step 2

  • Fasten the BOTTOM BUMPER bracket with (2) screws 5/16" self-tapping hex head screws.

Step 3

  • Repeat Steps 1-2 for the opposite side of the door.

Step 4

  • Continue with the manufacturers instructions to install the latch.

Installation Instructions for Clopay Doors

Step 1

  • Slide the Bottom Bumper up from the bottom of the door; behind the roller pin
  • Make sure the foot of the bracket goes away from you (under the door)

Step 2

Install the retainer bracket from the top and align the mounting holes on both brackets.

Step 3

• Insert the provided self-tapping screw into the mounting hole.

• Verify the bracket is secured around the pin.

(Repeat all steps for the opposite side of the door)

Button label